Broadside Built Universal Airbag System
Starting at $4,999
The Broadside Built Universal Airbag System is our complete foundation for building a premium air-ride suspension system on a custom truck.
Instead of piecing together a controller, compressors, tank, bags, fittings, wiring, brackets, and chassis components from multiple suppliers, we combine the major hard parts into one complete package built around the same level of quality, performance, reliability, and serviceability we expect in our own builds.
Each system is tailored to order around your selected air-management components, battery configuration, airbags, compressors, and finish while keeping the overall system universal enough to work with a wide range of custom truck applications.
Standard Package Includes
Air Management
Slam Specialties SV-8C 4-corner air manifold
Slam Specialties MC.2 handheld controller and receiver
Dual VIAIR compressors
Spun aluminum air tank
Water trap / moisture separator
50 ft. DOT-rated air line
Brass air fittings
Suspension
Electrical
Power and ground wiring
Trigger wiring
Electrical connectors and terminals
Heat shrink and protective loom
Circuit protection
Stinger high-current relay
Associated electrical hardware
Broadside Built Fabricated Components
Universal Air Management System Bracket
Designed and fabricated around the selected tank, compressors, controller, electrical components, and overall layout.
Available:
8" Step Notches
A pair of premium Broadside Built mild-steel step notches providing approximately 8 inches of chassis clearance.
Optima Battery Box
Designed around a standard Optima RedTop battery and adaptable to other battery configurations when specified at the time of order.
Available raw or with premium finishing.
Battery is not included unless specifically added to the order.
Tailored to Your Build
The standard system represents our recommended combination of quality, performance, and value, but virtually every major component can be changed to accommodate the individual build.
Options can include different:
Air controllers
Compressors
Airbags
Tanks
Batteries
Management layouts
Finishes
Final pricing may vary depending on selected components, configuration, and finish.
What Is Not Included
The Broadside Built Universal Airbag System is a universal fabrication system, not a vehicle-specific bolt-on suspension kit.
Because every chassis and suspension combination is different, the package does not include:
Vehicle-specific airbag crossmembers
Vehicle-specific bag mounting plates
Vehicle-specific bag brackets
Installation labor
Chassis fabrication
Welding
Battery
Shipping
Vehicle-specific crossmembers, brackets, and mounting components can be sourced or fabricated separately depending on the application.
Built for Fabricators
This system is intended for professional shops, experienced builders, and customers having their vehicle professionally fabricated.
Bag placement, suspension geometry, shock placement, axle clearance, driveline clearance, frame reinforcement, and final installation must be determined for the individual vehicle.
Professional fabrication and welding are required.
Why Broadside Built?
We aren't trying to build the cheapest air suspension package on the market.
We designed this system to offer the most value for the money while maintaining the level of quality we are willing to put the Broadside Built name on.
You get proven premium air-management components combined with American-made Broadside Built fabrication in one organized package that can be tailored around your project.
$4,999 Starting Price
Price may vary based on selected parts, configuration, and finishes.
Broadside Built — American Made Fabrication. Premium Components. Built to Be Used.
Broadside Built Universal Airbag System
Starting at $4,999
The Broadside Built Universal Airbag System is our complete foundation for building a premium air-ride suspension system on a custom truck.
Instead of piecing together a controller, compressors, tank, bags, fittings, wiring, brackets, and chassis components from multiple suppliers, we combine the major hard parts into one complete package built around the same level of quality, performance, reliability, and serviceability we expect in our own builds.
Each system is tailored to order around your selected air-management components, battery configuration, airbags, compressors, and finish while keeping the overall system universal enough to work with a wide range of custom truck applications.
Standard Package Includes
Air Management
Slam Specialties SV-8C 4-corner air manifold
Slam Specialties MC.2 handheld controller and receiver
Dual VIAIR compressors
Spun aluminum air tank
Water trap / moisture separator
50 ft. DOT-rated air line
Brass air fittings
Suspension
Electrical
Power and ground wiring
Trigger wiring
Electrical connectors and terminals
Heat shrink and protective loom
Circuit protection
Stinger high-current relay
Associated electrical hardware
Broadside Built Fabricated Components
Universal Air Management System Bracket
Designed and fabricated around the selected tank, compressors, controller, electrical components, and overall layout.
Available:
8" Step Notches
A pair of premium Broadside Built mild-steel step notches providing approximately 8 inches of chassis clearance.
Optima Battery Box
Designed around a standard Optima RedTop battery and adaptable to other battery configurations when specified at the time of order.
Available raw or with premium finishing.
Battery is not included unless specifically added to the order.
Tailored to Your Build
The standard system represents our recommended combination of quality, performance, and value, but virtually every major component can be changed to accommodate the individual build.
Options can include different:
Air controllers
Compressors
Airbags
Tanks
Batteries
Management layouts
Finishes
Final pricing may vary depending on selected components, configuration, and finish.
What Is Not Included
The Broadside Built Universal Airbag System is a universal fabrication system, not a vehicle-specific bolt-on suspension kit.
Because every chassis and suspension combination is different, the package does not include:
Vehicle-specific airbag crossmembers
Vehicle-specific bag mounting plates
Vehicle-specific bag brackets
Installation labor
Chassis fabrication
Welding
Battery
Shipping
Vehicle-specific crossmembers, brackets, and mounting components can be sourced or fabricated separately depending on the application.
Built for Fabricators
This system is intended for professional shops, experienced builders, and customers having their vehicle professionally fabricated.
Bag placement, suspension geometry, shock placement, axle clearance, driveline clearance, frame reinforcement, and final installation must be determined for the individual vehicle.
Professional fabrication and welding are required.
Why Broadside Built?
We aren't trying to build the cheapest air suspension package on the market.
We designed this system to offer the most value for the money while maintaining the level of quality we are willing to put the Broadside Built name on.
You get proven premium air-management components combined with American-made Broadside Built fabrication in one organized package that can be tailored around your project.
$4,999 Starting Price
Price may vary based on selected parts, configuration, and finishes.
Broadside Built — American Made Fabrication. Premium Components. Built to Be Used.
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5